L-IP Router CEA-709

CEA-709
OPC UA
OPC XML-DA
Wireless Local Area Network (WLAN)
LTE
SNMP
Ethernet (Ethernet Switch)
CEA-709 Router Function
Local Manual Operation
Network Security
Remote Access
Web Server for Device Configuration
VNC (Virtual Network Computing)
Backup / Restore
LWEB-900 Integrated Building Management System
UL Recognized Product
UL Listed Product
The L-IP Routers LIP‑1ECTC, LIP‑3ECTC, LIP‑33ECTC, and LIP‑3333ECTC connect twisted pair channels (TP/‌FT‑10 or TP/‌XF‑1250) with the Ethernet/‌IP channel (IP‑852) in LonMark Systems. L-IP routes CEA‑709 packets through an IP based network such as a LAN (Ethernet), an Intranet, or even the Internet. In order to provide optimal router configurations, the L-IP is available in four different versions providing either 4 x TP/FT‑10, 2 x TP/FT‑10, 1 x TP/FT10, or 1 x TP/XF‑1250. Every L-IP supports the operating modes “Smart Switch Mode” and “Configured Router Mode”.

For an easy integration on the IP side, the L-IP provides a Web interface. On L-IP Routers LIP‑1ECTC, LIP‑3ECTC, LIP‑33ECTC, and LIP‑3333ECTC the Web interface can also be used via an encrypted HTTPS connection. Through this Web interface, the built-in CEA-852 Configuration Server can be switched on and configured. The Configuraton server is thus always available online in the network and no additional software tool is required. 

Besides the router functionality, the L-IP Routers provide outstanding capabilities for network diagnostic and analysis. They allow the LPA (LOYTEC Protocol Analyzer) transparent access to the twisted pair channels (TP/‌FT-10 or TP/XF-1250) on the device via Ethernet/‌IP – via a local Intranet or the Internet. This allows a fast analysis of data communication and reduces time-consuming troubleshooting. All system registers are available as OPC XML‑DA and OPC UA data points.

The L-IP Routers LIP‑1ECTC, LIP‑3ECTC, LIP‑33ECTC, and LIP‑3333ECTC are equipped with two Ethernet ports. It can either be configured to use the internal switch to interconnect the two ports or every port is configured to work in a separate IP network.

When the Ethernet ports are configured for two separate IP networks, one port can be connected for instance to a WAN (Wide Area Network) with enabled network security (HTTPS) while the second port can be configured to be connected to an insecure network (building LAN) where the standard building automation protocols are present (e.g. IP-852). These devices also feature firewall functionality, of course to isolate particular protocols or services between the ports. The built-in VPN function provides for simple VPN setup and secure access to remote sites. The LTE-800 interface enables wireless access to remote sites through a mobile carrier.

Using the internal switch, a daisy chained line topology of up to 20 devices can be built, which reduces costs for network installation. The IP switch also allows the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

 

lip_overview

LIP_Web_UI

 Features

  • Routes CEA‑709 packets between TP/‌FT‑10 (link power compatible) or TP/‌XF‑1250 channels and Ethernet/‌IP (IP‑852)
  • Compliant with CEA-709, CEA-852, and ISO/‌IEC 14908-1 standard (LonMark System)
  • Supports Configured Router mode, Smart Switch mode, and Repeater mode
  • Built-in CEA-852 configuration server for up to 100 members
  • Support for operation behind NAT routers and firewalls
  • Easy installation, Auto-NAT, roaming, DHCP
  • Remote LPA support with LPA-IP
  • Integrated web server for device and IP-852 configuration
  • Built-in enhanced communication test for IP-852
  • Network diagnostic LEDs
  • Dual switched or separated Ethernet ports
  • Secure Web interface via HTTPS
  • Built-in OPC XML‑DA and OPC UA server
  • 128x64 graphic display with backlight
  • Local display of device information
  • Manual operation using the jog dial or VNC client
  • Supports WLAN through LWLAN-800 Interface
  • Supports LTE through LTE‑800 Interface
  • Stores user-defined project documentation
  • Supports VPN for IP-852

L-IP Router CEA-709 Products


LIP-1ECTC
LIP-1ECTC

CEA-709/IP-852 Router, 1 x TP/XF-1250, 2 x Ethernet Port (IP-852)

Start quote request
Documentation and Software
3D View

LIP-3ECTC
LIP-3ECTC

Successor of LIP-3ECTB, CEA-709/IP-852 Router, 1 x TP/FT-10, 2 x Ethernet Port (IP-852)

Start quote request
Documentation and Software
3D View

LIP-33ECTC
LIP-33ECTC

Successor of LIP-33ECTB, CEA-709/IP-852 Router, 2 x TP/FT-10, 2 x Ethernet Port (IP-852)

Start quote request
Documentation and Software
3D View

LIP-3333ECTC
LIP-3333ECTCSuccessor of LIP-3333ECTB, CEA-709/IP-852 Router, 4 x TP/FT-10, 2 x Ethernet Port (IP-852)
Start quote request
Documentation and Software
3D View

LPOW-2415B
LPOW-2415B

Power supply unit with power connector 24 VDC, 15 W

Start quote request
Documentation and Software
3D View

LWLAN-800
LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

Start quote request
Documentation and Software
3D View

LT-03
LT-03

Network terminator for 1 x TP/FT-10 or TP/LPT-10 (bus or free topology), 1 x Network Access Connector RJ45

Start quote request
Documentation and Software
3D View

LT-13
LT-13

Network terminator for: 1 x TP/FT-10 or TP/LPT-10 (bus or free topology), 1 x TP/XF-1250 (bus toplogy only)

Start quote request
Documentation and Software
3D View

LT-33
LT-33

Network terminator for 2 x TP/FT-10 or TP/LPT-10 (bus or free topology)

Start quote request
Documentation and Software
3D View