LDALI‑PLC2 / LDALI‑PLC4: Programmable DALI Controller

CEA-709
BACnet
OPC XML-DA
OPC UA
DALI-2
KNX
Modbus
EnOcean
SMI
Wireless Local Area Network (WLAN)
LTE
LIOB-IP
Alarming (Alarm Management)
Scheduling
Trending (Historic Data Logging)
IoT
E-mail Notification
SMS Notification
Ethernet (Ethernet Switch)
Gateway Function
Local Connection
Global Connection
Local Manual Operation
Network Security
Remote Access
Web Server for Device Configuration
VNC (Virtual Network Computing)
Mathematical Functions
Backup / Restore
LWEB-900 Integrated Building Management System
LWEB-802/803 Visualization
IEC 61131 – L-STUDIO
IEC 61499 – L-STUDIO

The LDALI‑PLC2/PLC4 controllers are powerful, programmable lighting controllers, which can be programmed by L‑STUDIO. With Alarming, Scheduling, Trending and e‑mail notification (AST™) the LDALI‑PLC2/PLC4 controller is a perfect solution for DALI lighting systems with application requirements not covered by the standard application of the non‑programmable L‑DALI controllers.

DALI Network Interface

L‑DALI Controllers act as a DALI‑Master in the DALI network and can interact withDALI‑2 multi‑sensors and buttons in Multi‑Master mode. The LDALI‑PLC2/PLC4 is equipped with 2/4 independent DALI channels. Up to 64 DALI or DALI‑2 basedluminaries per DALI channel can be controlled individually or via 16 groups. Allluminaries are monitored for lamp or ballast defect. In addition up to 64 DALI‑2input devices are supported per DALI channel. Each input device can be equipped with push buttons, sliders, occupancy and light sensors.

Built-In DALI Bus Power Supply

The LDALI‑PLC4 comes with a built‑in DALI bus power supply, which can supply each DALI channel with a guaranteed supply current of 116 mA. An external DALI bus power supply can be added to top up the supply current to 232 mA. External power supplies are available for up to four DALI channels. The LDALI‑PLC2 pro‑vides a DALI‑bus power supply with guaranteed supply current of 230mA per channel. The internal DALI bus power can be switched on and off via web interface or LCD UI. Thanks to the switching power supply, these devices can handle input voltages from 85 – 240 V AC, 50/60 Hz.

Local Operation and Override

The L‑DALI Controllers come with a built‑in backlit display (128x64) and a jog dial for local operation and override. Using the local operation, maintenance tasks (DALI device replacement, burn‑in mode, etc.) can be executed without the need of any software tool.

Programmable

The LDALI‑PLC2/PLC4 can be programmed using the L‑STUDIO programming tool. It can be programmed using IEC 61499 for integration into the L‑ROC system and IEC 61131 for stand-alone operation.

IEC 61131 lighting control library available

A library containing standard lighting control functionality is available. It supports various lighting control strategies, presence and lux level based. Several parame‑ters can be used to configure the application for almost any use case. User specific program extensions are possible as well.

Connectivity

The LDALI‑PLC2/PLC4 controller provides connectivity functions to concurrently integrate CEA‑709 (LonMark Systems), BACnet, KNX, and Modbus subsystems. LonMark Systems can be integrated via IP‑852 (Ethernet/IP). BACnet integration is supported through BACnet/IP (Ethernet/IP), BACnet/SC or BACnet MS/TP (RS‑485), KNXnet/IP and Modbus TCP via Ethernet/IP.

The gateway functionality allows data communication between all communication technologies available on the device. Different technology data points are mapped through Local Connections on the device. The mapping of different technology data points on distributed devices is supported by Global Connections.

Each L-DALI Controller is equipped with two Ethernet ports. It can either be configured to use the internal switch to interconnect the two ports or every port is configured to work in a separate IP network.

When the Ethernet ports are configured for two separate IP networks, one port can be connected for instance to a WAN (Wide Area Network) with enabled network security (HTTPS) while the second port can be configured to be connected to an insecure network (LAN) where the standard building automation protocols like BACnet/IP, LON/IP, or Modbus TCP are present. These devices also feature firewall functionality to isolate particular protocols or services between the ports.

Using the internal switch, a daisy chained line topology of up to 20 devices can be built, which reduces costs for network installation. The IP switch also allows the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches.

The L-DALI Controllers provide fully featured AST™ functionality (Alarming, Scheduling, and Trending) and can be integrated perfectly into the L‑WEB System.

IoT Integration

The IoT function (Node.js) allows connecting the system to almost any cloud service, either for uploading historical data to analytics services, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking systems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment.

Device Configuration via Tool or Web Interface

The device configuration, commissioning, and parameterization is done either with the configuration tool software or via the integrated web server.

EnOcean, SMI and LIOB/‌IP

Wireless EnOcean sensors and buttons can be integrated via the optional L‑ENO EnOcean interface. For sunblinds the LSMI-804 extension module allows the integration of up to four SMI channels. Physical I/Os can be integrated through L‑IOB I/O Modules via LIOB‑IP.

L-DALI LON

Advanced DALI Functions

  • DALI Sensors
    The L-DALI Controllers support the integration of DALI-2 multi-sensors for presence detection and light level recognition. In addition to the LOYTEC multi-sensors LDALI‑MS2-BT/MS3‑BT/MS4‑BT, DALI-2 sensors of many well-known manufacturers can be used.
  • DALI Buttons

    For manual operation, DALI-2 push button couplers, like the LDALI-BM2, DALI-2 operation panels, and IR remote controls can be integrated into the system. The function executed when a button is pressed is freely programmable in the program logic. In addition the feedback feature for pushbutton instances according to IEC 62386‑332 is supported.

  • DALI Relay Modules
    Standard loads in the power grid can be controlled via DALI using DALI relay modules, like the LDALI-RM5, LDALI-RM6 and LDALI-RM8.
  • DALI Color Control
    The LDALI allow controlling DALI luminaires with color control functionality (DT8). Both, tunable white (Tc) and full RGB color control (RGBWAF and xy-coordinate) are supported. Changing the light colour is possible via scenes or controlled via the program logic.
  • Auto Burn-In for fluorescent Lamps
    Fluorescent lamps must be operated about 100 hours with 100 % brightness before they may be dimmed. This burn-in process is monitored by L‑DALI for each lamp. After 100 hours burn-in time, the lamp’s constant light control is enabled.
  • Automatic Test of Emergency Lighting Systems
    In DALI emergency lighting systems based on IEC 62386-202, L-DALI can be used for testing the system. The results can be logged.
  • Collection of important operational Parameters
    For maximum transparency in the lighting system, L‑DALI can record the operating hours of each lamp and also the energy consumption (calculated).
  • DALI Device Replacement made easy
    Defective DALI ballasts can easily be replaced directly on the L‑DALI Controller (LCD and jog dial) or via the web interface. No software tool is necessary.

ldali PLC4 plus pwr4 U lsmi804 leno rm3 bm2 01

Features

  • Programmable with L‑STUDIO IEC 61131‑3 and IEC 61499
  • Supports up to 64 DALI ballasts and 16 DALI groups per DALI channel
  • Supports up to 64 input devices overall per channel
  • Up to 16 DALI sensors per DALI channel are supported
  • Up to 64 DALI button modules per DALI channel are supported
  • Integrated DALI bus power supply
  • DALI‑2 certified
  • Manual operation using the jog dial and local access to information about device status and data points in clear text and symbols
  • 128x64 graphic display with backlight
  • Built‑in web server for device configuration
  • Test and assignment of DALI devices on the web interface
  • Replacement of DALI devices without additional software tools via LCD and jog dial
  • Supports the control of standard loads in the power grid via LDALI‑RM5/RM6/RM8 Relay Modules
  • Supports DALI‑2 devices (drivers and input devices)
  • Support DALI color control (DT8 tunable white & full color control)
  • Supports lamp burn‑in mode
  • Supports periodic testing of DALI emergency lights
  • Integrated DALI Protocol Analyzer
  • Physical inputs and outputs with L‑IOB I/O Modules
  • Compliant with CEA‑709, CEA‑852, and ISO/IEC 14908 Standard (LonMark System)
  • Support of dynamically created or static NVs
  • Support of user‑defined NVs (UNVTs) and Configuration Properties (SCPTs, UCPTs)
  • KNXnet/IP
  • Gateway functions including Smart Auto‑Connect™
  • Modbus TCP and Modbus RTU/ASCII
  • Compliant with ANSI/ASHRAE135‑2012 and ISO16484‑5:2012 standard
  • Supports BACnet MS/TP, BACnet/IP or BACnet/SC
  • BACnet Client Function (Write Property, Read Property, COV Subscription)
  • B‑BC (BACnet Building Controller) functionality, BTL certified
  • Alarming, Scheduling, and Trending (AST™) locally or embedded in L‑WEB (building management)
  • Node.js support for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment,...)
  • Event‑driven e‑mail notification
  • Supports Local and Global Connections
  • Built‑in OPCXML‑DA and OPCUA server
  • Stores customized graphical pages
  • Visualization of customized graphical pages through LWEB‑900 (building Management), LWEB‑803 (Monitoring and Control), or LWEB‑802 (Web Browser)
  • Stores user‑defined project documentation
  • Dual Ethernet/IP interface
  • Supports SMI (Standard Motor Interface) through LSMI‑804
  • Connection to EnOcean wireless devices via LENO‑80x Interface
  • Supports WLAN through LWLAN‑800 Interface
  • Supports LTE through LTE‑800 Interface
  • Configurable Bluetooth beacons and services: indoor navigation, asset tracking (requires LIC-ASSET license) and access to LWEB-900 room control solution

Tutorials

Light Library Tutorial

The video shows basic steps on how to create a light application with the LDALI-PLC2/PLC4 in L-STUDIO.

L-DALI 7.4 Release Tutorial - Features of the new DALI Release

This video provides a detailed overview on the new features of the latest firmware release.

Features of L-INX 8.0 Release

This video presents some features of the new firmware release.

LDALI‑PLC2 / LDALI‑PLC4: Programmable DALI Controller Products


LDALI-PLC2
LDALI-PLC2Programmable DALI Controller, 2 DALI channels, integrated DALI power supply
Start quote request
Documentation and Software

LDALI-PLC4
LDALI-PLC4Programmable DALI Controller, 4 DALI channels, integrated DALI power supply
Start quote request
Documentation and Software
3D View

L-STUDIO
L-STUDIODevice configuration and programming suite
Start quote request
Documentation and Software

LIC-ASSET
LIC-ASSETLIC-ASSET, Add-on Software License to activate asset tracking (for LDALI-ME20x-U, LDALI-3E10x-U, LDALI-PLCx, LROC-400, LROC-401, LIOB-AIR20, LIOB-591)
Start quote request

LOY-DALI-SBM1
LOY-DALI-SBM1LOY-DALI-SBM1 Sunblind Module
Start quote request
Documentation and Software
3D View

LDALI-PWR1-U
LDALI-PWR1-UDALI Power Supply for 1 DALI channel, 50mA
Start quote request
Documentation and Software
3D View

LDALI-PWR2-U
LDALI-PWR2-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 2 x 16 VDC, 116 mA (DALI bus)

Start quote request
Documentation and Software
3D View

LDALI-PWR4-U
LDALI-PWR4-U

DALI-2 power supply, 85-240 V, 50/60 Hz, Output: 4 x 16 VDC, 116 mA (DALI bus)

Start quote request
Documentation and Software
3D View

LDALI-MS2-BT
LDALI-MS2-BTDALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth), up to 12 m mounting height
Start quote request
Documentation and Software
3D View

LDALI-MS4-BT
LDALI-MS4-BTDALI-2 multi-sensor (presence detection, illuminance sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs, Bluetooth, flat lens), up to 5 m mounting height
Start quote request
Documentation and Software
3D View

LDALI-BM2
LDALI-BM2

Quadruple DALI pushbutton coupler

Start quote request
Documentation and Software
3D View

LDALI-RM5
LDALI-RM5DALI Relay Module 10 A, Analog Interface 1 – 10 V
Start quote request
Documentation and Software
3D View

LDALI-RM6
LDALI-RM6DALI Relay Module 10 A, Analog Interface 1 – 10 V, “spud-mount”
Start quote request
Documentation and Software
3D View

LDALI-RM8
LDALI-RM8

DALI Relay Modul, 8 channel

Start quote request
Documentation and Software
3D View

LDALI-PD1
LDALI-PD1DALI Phase-Cut Dimmer Module
Start quote request
Documentation and Software
3D View

LWLAN-800
LWLAN-800

Wireless LAN Interface IEEE 802.11bgn

Start quote request
Documentation and Software
3D View

LENO-800
LENO-800

EnOcean Interface 868 MHz Europe

Start quote request
Documentation and Software
3D View

LENO-801
LENO-801EnOcean Interface 902 MHz USA/Canada
Start quote request
Documentation and Software
3D View

LENO-802
LENO-802

EnOcean Interface 928 MHz Japan

Start quote request
Documentation and Software
3D View

LRS232-802
LRS232-802USB to 2x RS-232 Interface
Start quote request
Documentation and Software
3D View

LSTAT-810-G3-L0
LSTAT-810-G3-L0Remote EnOcean Antenna, Europe, White
Start quote request
Documentation and Software
3D View

LSTAT-820-G3-L0
LSTAT-820-G3-L0Remote EnOcean Antenna, USA/CA, White
Start quote request
Documentation and Software
3D View

LSTAT-830-G3-L0
LSTAT-830-G3-L0Remote EnOcean Antenna, Japan, White
Start quote request
Documentation and Software
3D View

LSMI-804
LSMI-804Standard Motor Interface for 64 motors, 4 SMI channels via USB
Start quote request
Documentation and Software
3D View

LTE-800
LTE-800

LTE Interface

Start quote request
Documentation and Software
3D View

L-RC1
L-RC1

Infrared remote control for room automation applications

Start quote request
Documentation and Software
3D View

LDALI-PWM4
LDALI-PWM4PWM module, DALI, 4 x 3 A LED outputs, 24 V DC ext.
Start quote request
Documentation and Software
3D View

LDALI-PWM4-TC
LDALI-PWM4-TCPWM module tunable white, DALI, 4 x 3 A LED outputs, 24 V DC ext.
Start quote request
Documentation and Software
3D View

LDALI-PWM4-RGBW
LDALI-PWM4-RGBWPWM module RGBW, DALI, 4 x 3 A LED outputs, 24 V DC ext.
Start quote request
Documentation and Software
3D View

LSTAT-810-GX-LX-CU
LSTAT-810-GX-LX-CULSTAT-800 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)
Start quote request
Documentation and Software
3D View

LSTAT-812-GX-LX-CU
LSTAT-812-GX-LX-CULSTAT-802 based custom design, includes EnOcean interface, minimum quantity 100 pcs, enclosure G1: silver, G2: black, G3: white; custom print Lx, including 2 working samples, lead time 10 weeks (needs LSTAT-80x-CUSTOM)
Start quote request
Documentation and Software
3D View

LSTAT-80x-CUSTOM
LSTAT-80x-CUSTOMOne-time customization cost for L-STAT custom design, including 2 working samples
Start quote request
Documentation and Software